T-Shirt Pillows

Every so often, a shirt comes around that is just too great to be stored in the closet. You might try to wear it as frequently as possible to share the awesomeness with the world. After all that sharing with the world, eventually it starts to wear out. That, my friends, is a sad, sad day. This is a story of two such shirts.



Behold the awesomeness that is this pink Elvis t-shirt that was a Birthday gift from my best friend, and this Golden Girls shirt my Gram gave me as a Christmas present. I have had a slight obsession with both Elvis and the Golden Girls since high school, if not before. Yup. I’m so hipster I liked these things before it was cool to ironically like them. Adjusts unnecessary glasses and sips PBR.

They’re both made of very thin material and were starting to get a little worn over the years. I was worried that a hole would develop and it might be lost forever. The best course of action was obviously to turn these great t-shirts into great pillows.

You Will Need:

Nerdtastic t-shirts
Scissors
Ruler
Chalk or Pencil
Sewing machine (or needle/ thread/ perseverance)
Stuffing
Straight pins
Embroidery floss (optional)

Square Pillow


Lay your t-shirt flat and decide how much of the main image you want to be featured on your pillow. Take a deep breath and thank the inanimate object that has been worn so many times and started so many conversations. Tentatively, hesitantly, and mournfully cut the sleeves and collar from the shirt. Have second thoughts. Decide to continue and tell yourself you’re giving it new life. Cut up the side seams of the shirt and across the shoulder seems, separating the shirt into two pieces, front and back.

Turn halves inside-out, use the ruler and chalk or pencil to draw a square on the shirt featuring the design as desired. Pin the two sides together inside your lines. Carefully cut out your square.

Use your sewing machine to stitch around the edges leaving about 3-4” open at the bottom of the pillow. Remove the pins and turn it right side out. Stuff your pillow A little fuller than you think it should be; the filling will flatten out over time. You can also use a pencil to help get the stuffing all the way into the corners. Once it’s full, use a slip stitch to sew up the last few open inches. You can stop there OR you can add tassels. And when you have the option to add tassels, why wouldn't you?

To make the tassels, don't listen to me. I kind of just messed with embroidery floss until it worked. Seriously. Each one is slightly different. Since I can't be trusted when it comes to tassels, this tutorial will be much more useful. When they're finished, just run a few stitches through the center of the tassel into the corners of the pillow.

Circle Pillow



The circle pillow shares a lot of steps with the square pillow but you have to be extra careful not to tug the fabric while machine sewing the edges or you'll end up with a lumpy circle. T-shirt material is notoriously difficult because it is so stretchy. I used a lamp shade as a guide for a perfect circle because I'm a classy, classy lady. Don't forget to leave a few inches open to turn right side out and stuff. Afterwards, stitch it up and you're all done.



Any favorite t-shirts laying around that need a makeover? Do you know how to make a good tassel? I'd love to know!

Sheila

The Start of an Apartment Container Garden (this could end badly)

Do you ever just get carried away with an idea? Usually, I thoroughly research before starting a project or making a purchases that could fail miserably. For some reason this time I just threw caution to the wind and came home with a sizable collection of baby plants and delusions of grandeur about a patio container garden.



For a beginner, it was bit ambitious but go big or go home I suppose. The collection includes strawberries, banana peppers, green bell peppers, and spinach, plus an "herb shelf" with mint, lavender, and parsley. Y'all. I went all in. But all in, in all the wrong ways. Just in case anyone out there is an naive about keeping plants alive as I am, I'm going to fill you in on all the mistakes and lessons so far so hopefully you won't have to make as many on your own.



For starters,there is a huge difference between garden soil and potting soil, which is probably insanely obvious to everyone but me. I didn't make this realization until reading the bag AFTER transplanting the first few plant babies. This was corrected the very next day with a healthy blend of potting soil and Compost Plus. Needless to say, I also had to grab some gloves since the Compost Plus is fresh off the dairy pasture...

Next, I had bought long, deep canisters called veranda boxes which don't come with the drain holes already popped out. You're supposed to do that yourself. I didn't notice until after filling the containers so fixing that took some fancy finagling. The herbs are in a smaller, shallower window box. Aside from the original drainage issue the boxes are great. They're heavy enough that wind doesn't bother them but light enough that I was able to move them inside when there was a freeze warning the other night.

The last lesson was on overcrowding. I had this image of lush, abundant garden boxes overflowing with edible greenery... I had put 4 pepper plants all right next to each other with about an inch inbetween before reading that they need some distance to allow roots to spread without competing for nutrients. Plants, like people, like their personal space. Who knew?

So in a nut shell: potting soil, draining, and space are the magic words. At least I knew enough to check how much sun they would need! After repairing the many, many mistakes, it was time to add the first personal touch with wood-burned plant markers. Oh, and did I mention they were free? Because starting a container garden is surprisingly expensive if you don't already have a ton of stuff on hand.

You will Need:

Wooden paint stirrers
woodburner
pencil
minimal fear of burning yourself



The nice man at the paint counter of Home Depot didn't even make a face when I asked for 8 paint stirrers without buying any paint. The hardest part of this project is following the curves in letters. Straight lines are nice and simple but even the slightest of curves gets a little complicated. Write out the labels while waiting for the woodburner to heat up, then very carefully go over the pencil with the burner. Watch your hands--that this is NOT playing around. I also recommend having a few extras you can practice on before going for the real thing, but I'm obviously a very novice woodburner so maybe that won't be an issue for you.



They're plain, but sturdy and rustic. If you really wanted to get fancy you could paint them or weatherize them.

You might be proud to know that not only are all of the original plant babies still alive, I actually have some seedlings sprouting for zucchini, eggplants, mini tomatoes, and sunflowers. The professionals didn't even have to start these. Naturally, a gardening Pinterest board was created.

Do you have any gardening experience? Container or otherwise. Any tips or rookie mistakes to avoid? I'd love to know!

Sheila

P.S. Happy belated Earth Day :)

When do you put up your (real or fake) tree?

Happy 2 days before Thanksgiving! Too early? Okay...

As I write this, I'm back in Sunny Florida where the weather is about 80 with a slight wind. It cracks me up that my entire family thought it was cold here this weekend. Do you know what the temperature was? 68 degrees. 6.8. That was a moment of realization for me that it wasn't changing my address, or moving a million times, or changing my drivers license to a new state that makes me no longer a Floridian. It's the fact that I'm no longer freezing when it's in the 60's outside. OH THE HUMANITY.

But all that aside, I have a serious question for y'all: When do you put up your Christmas tree? It's a tradition for our family to have the tree up the week of Thanksgiving, preferably before the holiday meal so we can enjoy it with any guests. My parents always use a fake tree. For about 20 years we had used a tree that had belonged to my Grandparents before it found it's way here. By the end, that little tree was sad, almost bare and leaning heavily but we loved it still! It wasn't until the tree started to look dangerously imbalanced that we bought a new tree.

I've been thinking long and hard about whether I want to buy a real tree this Christmas or a fake one to have for years to come. There's something so festive in the smell of a live tree, but there's also something to be said for having the same tree for many, many years. It's like having another member of the family just for the holidays. And then there's the maintenance of a real true vs. storage of a fake tree. I just don't know!

When do you set up your tree? Do you prefer real or fake trees? I'd love to know!

Sheila


P.S. My Mom uses beads as garland instead of tinsel around the tree. I love the simple look and it doesn't leave little pieces all over like tinsel does. Just a thought.

Scrapbook States!

You may have noticed by now that I really love maps, especially outline maps.




If you haven't noticed, there's plenty of proof here and here. There are so many amazing home decor projects on blogs out there but very few of them are possible for those of us renting. This isn't a huge project by any means, but could definitely add some color to plain beige, unpaintable, apartment walls. The secret? Removable glue dots. Those things are tiny dots of magic that hold forever and come right off when it's time to move on.

You will need:

Scrapbook paper, leftover scraps work great
a large map printout
scissors
removable glue dots

Print out your map. I believe the link included above is a public domain map. I printed it out over multiple sheets using Microsoft Paint because I'm high-tech. It seemed to work best printed in landscape, 3 sheets across and 3 down for a total of 9 sheets. Tape the 9 sheets together and cut out the large outline. I had to sacrifice Alaska and Hawaii in this... sorry.



Cut out each state from the big map and use as a guide to cut the state from the scrapbook paper. I didn't find it necessary to trace them beforehand. Helpful hint: As you cut out the states put them back together like a puzzle on a cookie sheet, it'll be much easier to transport them from your work space to the wall where you want to mount them. This whole process took about 2 hours, but I got distracted frequently. Thanks Netflix.



Add a glue dot or 2 to the back of each state and put 'em on the wall. I kept a quote on the wall with them for at least 9 months in my Montana apartment and when they came down they left no residue whatsoever. Not even a grease spot like sticky-tac tends to.


Basically, I hold a little bitterness to the New England area right now but I'll get over it.

If you invest in removable glue dots now, I've got some seasonal decorations coming up that will be able to use them as well ;) What are your favorite temporary decor projects? Any tricks up your sleeve for making a rented home feel homier? I'd love to know!

Sheila

DIY Paper Towel Holder

Happy Monday! I hope your weekend was as lovely as mine. I spent lots of time getting things unpacked and watching some of my favorite movies at the same time. I've stayed a list of all the projects I want to make in the next few weeks. This little guy was at the top of my list since I expected it to be pretty easy. Surprisingly, it worked out just the way I planned. 

I love the way the paper towel holder turned out. It matches my kitchen perfectly, looks cute, and was at least $5 cheaper to make than it would have been to buy a brand new one thanks to coupons and sales.

You will need:
2 pre-cut wooden dowels, 1/2" diameter and 12" long
2 decorative knobs with the screws attached to the base (make sure they are small enough for a roll of paper towels to fit over)
2 wood screws, 1" to 1-1/2"
1 precut circle plaque, mine was 6" across
Drill
Wood bit to pre-drill
Normal bit that fits your wood screws



Start by pre-drilling the center of one end of the dowels. It was surprisingly easy to keep the drill straight while doing this. Drill in as far as the bit will allow so you can make sure there is enough space to screw in the knobs all the way.



Once the holes are pre-drilled, hand tighten the knobs into the holes. Also, make sure the knobs you pick are small enough that a paper towel roll can fit around it so you don't have to unscrew it every time you need a new role.



Next, mark out where you want the holder dowel to sit on the circle plaque and where you want the sheet stopper dowel to go. I used a new roll of paper towels to help me figure this out. Pre-drill those holes as well.



Carefully hold the dowel up to the plaque, doing your best to keep it sitting straight. Its very easy for the dowels to become crooked. Drill through the bottom of the plaque into the dowel tight enough that the screw sits flush on the bottom. Repeat for the second dowel.



That's it! It takes a little guess work and about 20 minutes to make. Then you have your own custom paper towel holder.

What do you think? Would you rather just buy something like this and be done with it or do you enjoy knowing you created it yourself? I'd love to know!

Sheila

P.S. my camera cord is currently M.I.A so all the pictures had to be taken on my phone. That's why they are even worse than usual. Growing pains!

Plastic Bag Doormat (Work in Progress)

Sometimes, projects take longer than I expect.

For example, this is a doormat I've been working on made out of plastic bags. The first night I worked on it, I got is about 1/3 of the way finished. The next time I touched it I hardly made a difference. It's still sitting on the floor of my bedroom, staring at me. Mocking me with it's little plastic bag voice "Feeling lazy Sheila? We'll wait." Joke is on you, mean doormat, I'm going to post about you anyway.

This project is not at all difficult, but it is time consuming. When it's finished, we will have an easy to clean, waterproof doormat on our front porch. And it was freeeeeeeee.

You will need

-Plastic bags, I used around 60. 

-scissors

-rubberband

-Thick needle and thread

*60 sounds like a lot of bags but we had that lying around the apartment easily.  It's especially easy if you don't care if your bags are all the same color. Clearly, I don't. It's also helpful to have a roommate who supports your recycling hoarding habits. 

 

Start by cutting your bags into strips. For this project,  it's best to cut a few bags at a time and go back in sections. It's easy for the plastic to become tangled or unruly if you try to do too much at once. To cut the bag, flatten the sides in and remove the thin strip with the bottom seam and the handles. Cut the rest of the bag down the center long-wise to create 2 long circled strips. 

 Loop the circles together and tighten. 

The best compromise as far as tangle-free and not stopping every 5 minutes to cut more bags was to cut 3 bags and loop them all together at a time, for a "strand" that was 6 loops long. You will need 3 of these strands at a time; 9 bags for each section of braid. Start the braid by tying the ends together with a rubberband. 

It's easiest to braid if you have something to pull against, so I used the rubberband to attach the ends to the top of a chair. A door knob would work well too. An even, medium tension braid looked the best.

When you reach the ends of the strands, loop together a few more bags and add them to the end. I used about 20 bags in each strand for a total of 60 bags. I also moved the knot on my chair as I added bags so I didn't have to keep walking backwards around the apartment. Coiling the braided bags as you go makes it easier to see how much more you will need.

Once you've finished the braiding, you're ready for the tedious part: sewing. The bag cutting and braiding goes pretty quickly. It took maybe 2 hours (or the length of "You've Got Mail") from cutting the first bag to finishing the braid. The sewing is what is taking me forever. If you don't want to put it outside, you can probably get away with hot gluing it. But no cutting corners here!

I wanted my braid to lie flat so it would be a little wider and more flexible. I removed the rubber band from the end and started sewing by running a few quick stitches at the end to keep it held together. Working from the center around, the best way to keep stitches relatively unnoticeable is to run your needle between the strands (center to center) instead of through the plastic. It also requires less effort. Phew! 

Can you see the stitches? Granted, they're only in a few inches in the center so far...

Maybe now that the internet world knows about it, I'll be more motivated to finish. Especially since it will look so cute with all of Amanda's plants on the porch. I promise to give an update of the finished project.

Do you have the patience for a project like this? Or would you have to put it down and come back from time to time, like me? I'd love to know.

Sheila

Easy Cloth Napkins

Cloth napkins seem to be all the rage right now. I love that the trend is to have a set using a bunch of different patterns as shown perfectly here and here. Between those examples and the stash of fabric I need to start using up before moving, cloth napkins were happenin'. 

Cloth napkins are usually about 20" x 20". Fat quarters from the quilt section are about 18" x 22". You can buy a color-coordinated varied pack (using a 40% off coupon-woot!) and not have to worry about cutting to size; if you don't have a large, flat work space not having to cut fabric to size is a huge time saver.  The small size difference isn't noticeable.

You will need:
Fat quarters, as many quarters as napkins you desire
Lots of pins
Sewing machine

If you aren't lazy, you start by ironing. I clearly did not. Sorry.

If you are lazy or have finished ironing, you move on to the corners.

My Mom taught me a handy trick for making the corners, which is the hardest part of this project. In each corner, fold the tip over once, then fold it over again. Originally it was easier to stitch each corner as pictured. After a while I learned to hem the sides without needing this part stitched, so you will too I'm sure.

Double hem each side by folding the edge twice. It's the same idea as folding the corners, but in a straight line instead. It should make a perfect point if folded correctly. The tension on my sewing machine is a little out of whack so some of the stitches have character. 

Repeat this all the way around on each napkin to create your set.

Enjoy with something extra delicious. 

Do you use cloth napkins? I love the look and the fact that they don't waste paper, but I also don't want to waste water by washing them all the time. Have you found a happy medium? I'd love to know.

Sheila :) 

PS. Thoughts and prayers of healing and comfort to all those in Oklahoma. It's a scary time, but you have the support of the nation.

Suitcase Coffee Table

Sometimes the best things in life truly are free, or at least close to it. This coffee table adds so much charm and whimsy but it cost a grand total of $4. Yup. And that was technically a donation. To make this adorable and cheap table, you need very few things:

1. A hard shell suitcase (thrift stores, garage sales, and estate sales are the best) 

2. Table leg top plates - 4 (like these)

3. Table legs - 4 of your choice (these are super cheap and could easily be dressed up or left plain)

4. Screwdriver

5. Very short screws - I needed 16 but it depends on your top plates. The length also depends on your suitcase. Don't rely on any that come with the top plates because they are made for much thicker bases. If you're a really cool kid, just take your suitcase to the store with you and hold screws up to the edge to test it. I'm sure the people at the hardware store have seen crazier things. I speak from experience when I warn that getting screws that are even just a little too long means they will poke through the top which can scratch you, ruin the suitcase, or at the very least make it super wobbly. It's a small, but important detail.

Make sure the suitcase opens to be a flat surface before you try to use it as a table. Once you have all the materials, the first thing you need to do is the use the screwdriver to attach the top plates in the corner of the suitcase. If yours has a rounded edge like mine, the plate should go just before it starts to curve and instead of flush against the outside edge. Its' a good idea to keep your other hand, or at least a finger, or the outside of the suitcase so you can feel if the screw starts to poke through. No bueno.

After your top plate is secure, screw in the table legs. Flip the table over and you're done! It should take you a grand total of 20 minutes to make.

My suitcase was from an estate sale on the side of the interstate (the $4 donation) and the table legs/hardware were generously provided by friends who collect antiques  some of which are not always in the best of shapes and can be used for parts. The moral of the story is: always ask around. Who knows what you might find!

The best thing about this table is that when I moved, it was easy to unscrew that table legs but leave the top plates on, then shove curtains, pictures, and anything else that belonged in the living room inside. It was like creating a living room decorating kit, contained in a pop up coffee table. Cheap and functional. Who could ask for anything more?

In the Montana Apartment:

In the South Carolina apartment: 

If you decide to make one, let me know how it turns out! It could also be a fun idea for a nightstand or anywhere else you need some extra, but removable, surface space.

PS. My favorite part is that the address label of the last (maybe original?) owner is still taped on it. It adds so much character. I've been tempted to write a letter to that address before but that seems borderline creepy...

PSS. I'm struggling with blog worthy photos! Any advice is greatly appreciated! 

Light Switch Swag

Blurry again...
In my defense I only took the picture at the time because I wanted to show my Mom.
Not because I had planned to share it with the internet world. 

If you move a lot, or live in an apartment, you probably either can't or won't want to paint the walls. It's a great homey touch, but TONS of work.

In order to get around this predicament, I tried to think of little ways to add color and personality to walls without leaving anything permanent or difficult to change. One of my favorite ways has been to personalize light switch plates. It's SO easy and can turn out pretty stinkin' cute. But if they don't, a light switch plate costs about 50 cents from any hardware store so you can probably afford to mess up a few times.

To make the one you see pictured, use shades of green and brown construction paper (the dollar store is  a great place to load up on this crafting essential), markers, and Modpodge. Nothing fancy! The bird is actually a garden marker from the Target dollar section bought a while ago that came in a pack of 3. Cut the green paper into slightly different shapes and sizes of leaves, using a marker to accent. Layer them over the plate using Modpodge under and on top of each layer. Cut your brown paper to any tree shape you like, leaving enough extra to wrap around the sides. Marker again is great to add a little texture. This bird just happened to be on a piece of wire that goes the length of the plate. It was easy to use the brown paper to wrap around that wire and keep it in place. No glue needed! Using markers to color the screws adds a nice touch. Cover the whole thing in a healthy layer of Modpodge and let it dry. It takes about an hour to make, but let it dry overnight before you display it proudly.

The fun thing about this idea is that it can be as simple or complicated as your style. Not in the mood to cut out a bunch of leaves? Use 1 piece of scrapbook paper, or even a shopping bag from your favorite place, carefully cut out the area for the switch, and Modpodge that sucker into submission. Don't forget to let me know how it turns out!

Moving? Decide you need a change? Get new furniture? Make a new one! These would make a fun, unique, and inexpensive gift too. This one now belongs to a friend in Montana who helped me move and asked to keep it.

Sheila

Favorite Apartment Ever (So Far)

I'm convinced that my apartment while in Montana is actually the cutest apartment ever. And I don't say that lightly. I also don't mean how I decorated it. I mean, the basic layout and charm of it even when it was bare empty: adorable. Part of what makes it so neat is the long history of the building. According to the landlady, it was built in the early 20th century and was always intended to be apartments. My theory is they were built to accommodate the railroad workers flooding the west. In my mind, it makes total sense with the time period and the town. I used to love to imagine all the poeple who had lived there before me. Where were they from? What did they do? Where did they go? SO MANY THINGS I WANT TO KNOW.

The apartment is what I would describe as a modified studio. Technically it was a 1 bedroom, but in reality it was a large rectangle of a room that was split in half with a set of french doors in the middle. Then the kitchen was its own room as well as the bathroom (for obvious reasons). There wasn't a clear intention for either of the "rooms". They were both pretty big so in my head I separated each in half. The first half, with the front door that led to the hallway had a living room on one side:

And a dining room on the other: 

An example of the quirkiness: both of the doors pictured behind the table lead to the same closet. It's a great closet, but does it really need 2 doors? ANSWER ME, HISTORY. And yes, don't judge me that technically my clothes closet and dining room were in the same area. (Sorry all of these pictures looks  a little burry for some reason.)

Now to pass through the doors... That in real life were almost always open...

To my bedroom and craft room!

Command central, basically. Pictured as being a total mess because there was never a time when it wasn't.

The kitchen was apparently designed for someone about 7 feet tall. The wood of the bottom shelf in the cabinets was my eye level. Not even the contents, the wood itself. But it had this awesome little spice rack/pantry thing built next to the back door!

Did I mention there was a claw foot tub?

For those of your who don't know, taking baths in a claw foot tub is amazing. Taking showers, however, is not. You almost need a forcefield of shower curtains around you to try to keep the water from spilling out, and then the curtains start billowing in on you at times. I now understand the reason they started to lose favor in the modern world.

I miss my little Montana apartment... Anyway, as you can see, the apartment was full of charm and inspiration. My year there allowed me to try my hand at tons of fun little DIY projects that I can't wait to share. Did you ever live in a building that was older than some states? I'd love to hear about it! If you see anything in the pictures you have questions about, please comment and I've be happy to answer.